Clamp T M2931s | Grating height 50 mm | V2A (1.4301) | for GRP gratings
FeNau GmbH
Stock:
33
Product number:
GFK-B2931-502
EAN:
4060272119349
Description
Product information "Clamp T M2931s | Grating height 50 mm | V2A (1.4301) | for GRP gratings"
Clamp T M2931s for the positive-fit fixing of GRP gratings with a grating height of 50 mm, made from V2A (1.4301). Suitable for MT 20x20, 25x25 and 26x26 mm.
Technical data
| Type | Clamp T M2931s |
|---|---|
| Grating height | 50 mm |
| Material | V2A (1.4301) |
| Suitable for | MT 20x20, 25x25 and 26x26 mm |
| Standard | Corrosion protection in accordance with BGI/GUV 588/1 and DIN 24537-3 |
| Sales unit | 1 piece |
Your benefits
- Precisely fitted for a grate height of 50 mm
- Material: V2A (1.4301) – as corrosion-resistant as the grating itself
- Positive fit, no slippage in the direction of support
- Supplied complete with bolt, washer and nut
- Fitting from above, without access to the underside
Typical applications
- Fastening of GRP gratings to steel and GRP substructures
Installation and notes
- In accordance with BGI/GUV 588/1 and DIN 24537-3, each grating must be secured by positive locking at at least four corner points; where there is a risk of falling, it must also be secured against lifting.
- V2A (1.4301) for normal environments, V4A (1.4571/1.4404) for chloride, seawater and chemicals.
- The mesh spacing and grating height must be suitable for the grating – if in doubt, please contact us.
Properties
| Höhe: | 50 |
|---|---|
| Maschenweite | Steps | Drahtgewebe: | 20 x 20 mm, 25 x 25 mm, 26 x 2 |
| Werkstoff: | Edelstahl V2A (1.4301) |
