Clamp T M2942 | Grating height 38 mm | V2A (1.4301) | for GRP gratings
FeNau GmbH
Stock:
30
Product number:
GFK-B2942-382
EAN:
4060272119400
Description
Product information "Clamp T M2942 | Grating height 38 mm | V2A (1.4301) | for GRP gratings"
Clamp T M2942 for the positive-fit fastening of GRP grating with a grating height of 38 mm, made from V2A (1.4301). Suitable for MT 38x38 mm (safety flooring).
Technical data
| Type | Clamp T M2942 |
|---|---|
| Grating height | 38 mm |
| Material | V2A (1.4301) |
| Suitable for | MT 38x38 mm (safety floors) |
| Standard | Corrosion protection in accordance with BGI/GUV 588/1 and DIN 24537-3 |
| Sales unit | 1 piece |
Your benefits
- Precisely fitted for a grating height of 38 mm
- Material: V2A (1.4301) – as corrosion-resistant as the grating itself
- Form-fit connection, no slippage in the direction of load-bearing
- Supplied complete with bolt, washer and nut
- Fitting from above, without access to the underside
Typical applications
- Fastening of GRP gratings to steel and GRP substructures
Installation and instructions
- In accordance with BGI/GUV 588/1 and DIN 24537-3, each grating must be secured by positive locking at at least four corner points; where there is a risk of falling, it must also be secured against lifting.
- V2A (1.4301) for normal environments; V4A (1.4571/1.4404) for environments containing chlorides, seawater and chemicals.
- The mesh spacing and grating height must be suitable for the grating – if in doubt, please contact us.
Properties
| Höhe: | 38 |
|---|---|
| Maschenweite | Steps | Drahtgewebe: | 38 x 38 mm |
| Werkstoff: | Edelstahl V2A (1.4301) |
Product safety (GPSR)
Manufacturer / responsible person in the EU: FeNau GmbH, Veit-Stoß-Str. 20, 90579 Langenzenn, Germany · info@fenau.eu · +49 911 97917230
Safety information: metal products may have sharp edges – wear protective gloves. Observe permissible loads and installation instructions; secure components properly before use.
All product safety information → · Your legal guarantee rights →
