GRP grating 2007 x 1007 mm | MT 13 x 13 mm | Height 30 mm | quartz-sand-coated | R13
FeNau GmbH
Stock:
16
Product number:
GFK-R3013Q-01
EAN:
4060272591541
Weight:
39.1 kg
Description
Product information "GRP grating 2007 x 1007 mm | MT 13 x 13 mm | Height 30 mm | quartz-sand-coated | R13"
The cast GRP grating, with a 13 x 13 mm mesh size and a height of 30 mm, replaces steel grating wherever moisture, chemicals or salty air are present. The support bars run in both directions over the full height – the grating provides equal load-bearing capacity in every direction. Quartz-sandblasted (QB) surface finish with R13 slip resistance.
Technical data
| Design | cast, support bars in both directions |
|---|---|
| Grating size | 2007 x 1007 mm |
| Overall height | 30 mm |
| Mesh size | 13 × 13 mm |
| Clear mesh size | ~8 x 8 mm |
| Surface | quartz-sandblasted (QB) |
| Slip resistance | R13 in accordance with DIN 51130 |
| Resin matrix | IPR (isophthalic acid polyester resin) |
| Reinforcement | E-glass |
| Colour | grey, similar to RAL 7032 |
| Weight | 39.10 kg |
Your benefits
- Corrosion-resistant – no rust, no re-galvanising, no maintenance
- Resistant to numerous acids and alkalis
- Around 75 per cent lighter than a comparable steel grating – can be installed without lifting equipment
- Non-conductive and non-magnetic
- Slip resistance class R13 in accordance with DIN 51130
- Can be cut to customer specifications at short notice from stock
Typical applications
- Areas with public footfall and small parts handling
- Sewage treatment works and water management
- Electroplating and surface treatment
- Chemical, pharmaceutical and process plants
- Walkways, platforms and stages
- Offshore, port and swimming pool technology
Installation and instructions
- In accordance with BGI/GUV 588/1 and DIN 24537-3, every grating must be secured by a positive fit at at least four corner points; where there is a risk of falling, it must also be secured against lifting.
- Seal any cut edges on site using MEISER TopSeal.
Properties
| Form: | rechteckig |
|---|---|
| Höhe: | 30 |
| Länge: | 2007 |
| Maschenweite | Steps | Drahtgewebe: | 13 x 13 mm |
| Oberfläche: | quarz besandet (QB) |
| Rutschhemmung | Steps: | R13 |
| Werkstoff: | GFK / IPR (Isophthalsure-Polye |
| Breite: | 1007 |
