GRP grating 2447 x 1247 mm | Mesh size 20 x 20 mm | Height 17 mm | Flat-ground | R10
FeNau GmbH
Stock:
28
Product number:
GFK-R1720GO-01
EAN:
4060272014002
Weight:
33.9 kg
Description
Product information "GRP grating 2447 x 1247 mm | Mesh size 20 x 20 mm | Height 17 mm | Flat-ground | R10"
The cast GRP grating, with a 20 x 20 mm mesh size and a height of 17 mm, replaces steel grating wherever moisture, chemicals or salty air are present. The support bars run in both directions over the full height – the grating provides equal load-bearing capacity in every direction. Surface: flat-ground (GS) with R10 slip resistance.
Technical data
| Design | cast, support bars in both directions |
|---|---|
| Grating size | 2447 x 1247 mm |
| Height | 17 mm |
| Mesh spacing | 20 x 20 mm |
| Clear mesh size | ~14 x 14 mm |
| Surface | flat ground (GS) |
| Slip resistance | R10 in accordance with DIN 51130 |
| Resin matrix | OPR (orthophthalic acid polyester resin) |
| Reinforcement | E-glass |
| Colour | grey, similar to RAL 7047 |
| Weight | 33.90 kg |
Your benefits
- Corrosion-resistant – no rust, no re-galvanising, no maintenance
- Resistant to numerous acids and alkalis
- Around 75% lighter than a comparable steel grating – can be installed without lifting equipment
- Non-conductive and non-magnetic
- Slip resistance class R10 in accordance with DIN 51130
- Can be cut to customer specifications at short notice from stock
Typical applications
- Areas with public footfall and small parts handling
- Sewage treatment works and water management
- Electroplating and surface treatment
- Chemical, pharmaceutical and process plants
- Walkways, platforms and stages
- Offshore, port and swimming pool technology
- Rolling traffic and level support surfaces
Installation and Notes
- In accordance with BGI/GUV 588/1 and DIN 24537-3, every grating must be secured by positive locking at at least four corner points; where there is a risk of falling, it must also be secured against lifting.
- Seal any cut edges on site with MEISER TopSeal.
- Edge lengths exceeding 2400 mm: We will inform you of the delivery costs, including the surcharge for oversized items, prior to order confirmation.
- This item is not always in stock – please enquire about availability and delivery times.
Properties
| Form: | rechteckig |
|---|---|
| Höhe: | 17 |
| Länge: | 2447 |
| Maschenweite | Steps | Drahtgewebe: | 20 x 20 mm |
| Oberfläche: | plan geschliffen (GS) |
| Rutschhemmung | Steps: | R10 |
| Werkstoff: | GFK / OPR (Orthophthalsure-Pol |
| Breite: | 1247 |
