GRP grating 3012 x 1220 mm | Mesh size 38 x 38 mm | Height 38 mm | Concave | R13
FeNau GmbH
Stock:
81
Product number:
GFK-R3838KY-02
EAN:
4060272012596
Weight:
69.8 kg
Description
Product information "GRP grating 3012 x 1220 mm | Mesh size 38 x 38 mm | Height 38 mm | Concave | R13"
The cast GRP grating, with a 38 x 38 mm mesh size and a height of 38 mm, replaces steel grating wherever moisture, chemicals or salty air are present. The support bars run in both directions over the full height – the grating provides equal load-bearing capacity in every direction. Concave surface (K) with R13 slip resistance.
Technical data
| Design | cast, support bars in both directions |
|---|---|
| Grating size | 3012 x 1220 mm |
| Overall height | 38 mm |
| Mesh spacing | 38 x 38 mm |
| Clear mesh size | ~31 x 31 mm |
| Surface | concave (K) |
| Slip resistance | R13 in accordance with DIN 51130 |
| Resin matrix | IPR (isophthalic acid polyester resin) |
| Reinforcement | E-glass |
| Colour | yellow, similar to RAL 1023 |
| Weight | 69.80 kg |
| Rod thickness (top/bottom) | 7 mm / 5 mm |
| Open area | approx. 68 % |
| Weight per unit area | approx. 19 kg/m² |
| Max. span (1.5 kN point load, 4-sided) | 992 mm |
| Maximum span (2 kN/m² distributed load) | 1058 mm |
Your benefits
- Corrosion-resistant – no rust, no re-galvanising, no maintenance
- Resistant to numerous acids and alkalis
- Around 75 per cent lighter than a comparable steel grating – can be installed without lifting equipment
- Non-conductive and non-magnetic
- Slip resistance class R13 in accordance with DIN 51130
- Can be cut to customer specifications at short notice from stock
Typical applications
- Sewage treatment works and water management
- Electroplating and surface treatment
- Chemical, pharmaceutical and process plants
- Walkways, platforms and stages
- Offshore, port and swimming pool technology
Installation and instructions
- In accordance with BGI/GUV 588/1 and DIN 24537-3, every grating must be secured by positive locking at a minimum of four corner points; where there is a risk of falling, it must also be secured against lifting.
- Seal any cut edges on site using MEISER TopSeal.
- Edge lengths exceeding 2400 mm: We will inform you of the delivery costs, including the surcharge for excess length, prior to order confirmation.
- This item is not always in stock – please enquire briefly about availability and delivery times.
Properties
| Form: | rechteckig |
|---|---|
| Höhe: | 38 |
| Länge: | 3012 |
| Maschenweite | Steps | Drahtgewebe: | 38 x 38 mm |
| Oberfläche: | konkav (K) |
| Rutschhemmung | Steps: | R13 |
| Werkstoff: | GFK / IPR (Isophthalsure-Polye |
| Breite: | 1220 |
