180-degree elbow (welded fittings, Type 3 DIN)
// 180° pipe bend for secure pipe connections with a complete change of direction.
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating, building standard grating
- Grating fixing
- Grating, grating for channels, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press-Podestroste mit Antrittskante
- Safety toe cap
- Door frames
- Boat jetty
- Custom-made grating
- SEPGRATE designer covers
- Pulverbeschichtung für Gitterroste
- GRP
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- Freitragende Schiebetore (Kragarm)
- Bodengeführte Schiebetore
- Torantriebe & Steuerung
- Zubehör Schiebetor
- Schlösser & Riegel
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New arrivals
Filter products
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Here you will find 180° stainless steel pipe bends in standardised Type 3 (DIN 2605 / EN 10253). These so-called double bends or deflection bends are ideal for space-saving pipe deflection in pipework networks or as an elegant handrail end cap in balustrade construction. Available in V2A and V4A.
Geometry check: The ‘centre-to-centre distance’ for Type 3
For a 180° bend, in addition to the radius, the centre-to-centre distance (axis distance) between the two pipe ends is particularly crucial. As this is Type 3 (radius ≈ 1.5 x diameter), the result is a very compact design:
The distance from pipe centre to pipe centre is exactly twice the radius.
Example (42.4 mm pipe): Radius approx. 63.5 mm → centre-to-centre distance approx. 127 mm.
This is the standard for compact bends and classic ‘riding boot’ end caps on railings.
Applications & finishes
Choose the finish to suit your project:
Sanded (240 / 320 grit)
For handrails & design.
- Handrail end cap: Popular for connecting two parallel handrails (‘U-bend’).
- Appearance: Finely sanded, to match our K240/K320 tubes.
- Finish: Seamless welding for a clean, ‘one-piece’ look.
Unpolished (matt)
For engineering & heating.
- Piping: As a space-saving deflection in heating coils or cooling systems.
- Economical: A cost-effective solution when appearance is of secondary importance.
- Industry standard: Matt, thermally annealed and ideal for welding.
Which alloy do you require?
- V2A (1.4301 / 1.4307): The standard choice for indoor applications and normal outdoor use. Suitable for most railings and heating installations.
- V4A (1.4404 / 1.4571): For corrosive environments. Choose V4A for swimming pools, coastal regions or chemical process pipework.
All 180° bends are designed as welded fittings (not a push-fit system) and feature V-groove preparations at the ends.