Corner solutions
// Cross-bar brackets for corners, so that your railing curves smoothly round the bend.
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating, building standard grating
- Grating fixing
- Grating, grating for channels, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press-Podestroste mit Antrittskante
- Safety toe cap
- Door frames
- Boat jetty
- Custom-made grating
- SEPGRATE designer covers
- Pulverbeschichtung für Gitterroste
- GRP
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- Freitragende Schiebetore (Kragarm)
- Bodengeführte Schiebetore
- Torantriebe & Steuerung
- Zubehör Schiebetor
- Schlösser & Riegel
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New arrivals
Filter products
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : 1-3 days
Available, : 1-3 days
Available, : Lieferzeit 5-10 Werktage
Cross-bar brackets for corners: the perfect solution for the 90° challenge
Anyone can do a straight run. The true quality of a balustrade is revealed where the direction changes: at the corner. Many suppliers let you down here, offering only unsightly ‘makeshift solutions’ or interrupted balusters.
Not so with FeNau. With our specialised crossbar brackets for corners (90° corner solutions), you can continue the line of your balustrade seamlessly. Whether the infill bar needs to be routed round the edge of a building (external corner) or converges in a recess (internal corner) – we have exactly the right component.
The principle: as well thought-out as in a technical drawing
Building around a corner requires precision. Our corner brackets are designed to accommodate or guide the rail at an exact 90° angle. This saves you from having to carry out complicated bending work on site. We distinguish between two main variants that you’ll need for a complete ‘circumference’:
1. The external corner (90° external)
The scenario: Your railing runs round a balcony or the corner of a house.
The FeNau solution: Here, the bracket protrudes slightly further or is specially angled to guide the infill bar neatly round the post. The line of the crossbars is not interrupted, and the design remains seamless (‘as if cast from a single mould’).
2. The inside corner (90° inside)
The scenario: The balustrade runs in an L-shape along the inside of a wall or terrace.
The FeNau solution: Here, the balusters meet at the inner angle. Our inner-corner crossbar brackets are designed to be so compact that they bring the balusters together precisely at the corner without the brackets’ mounting plates getting in each other’s way.
No sharp edges, no interruptions
Why is a dedicated corner solution for cross-bar brackets so important?
- Safety: You avoid exposed rail ends at the corner, where people could get caught or injured.
- Stability: The corner connection creates a structurally integrated unit. The entire railing becomes stiffer and more stable.
- Aesthetics: Instead of two blunt ends, you see an elegant, continuous line of stainless steel.
📏 Expert planning tip:
Look at the floor plan of your project from above (as in a technical drawing).
If the post is positioned exactly in the corner, you’ll need exactly one corner bracket
per row of crossbars. Check beforehand whether you need an internal
or external corner
. At FeNau, both variants are available to fit our standard connectors.
Technical details
- Angle: Exactly 90° (standard for the construction industry)
- Material: High-quality V2A / V4A stainless steel
- Surface: Smoothly sanded (240-grit)
- Installation: Simply screw onto the post; secure the balusters using grub screws.
Don’t cut corners. Build your railing professionally ‘round the corner’ with FeNau’s 90° corner crossbar brackets.