Carrying handle
// Reliable support for handrails and balustrade systems.
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating, building standard grating
- Grating fixing
- Grating, grating for channels, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press-Podestroste mit Antrittskante
- Safety toe cap
- Door frames
- Boat jetty
- Custom-made grating
- SEPGRATE designer covers
- Pulverbeschichtung für Gitterroste
- GRP
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- Freitragende Schiebetore (Kragarm)
- Bodengeführte Schiebetore
- Torantriebe & Steuerung
- Zubehör Schiebetor
- Schlösser & Riegel
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New arrivals
Filter products
Available, : 1-3 days
Available, : Lieferzeit 5-10 Werktage
Available, : 1-3 days
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Stainless steel support brackets: The flexible connector for your handrails
Flexibility is key in metalwork. Often, you don’t need the complete handrail bracket, but are specifically looking for the right support bracket as a single component. Whether for a DIY project, replacing a faulty part or fitting existing posts with a new handrail mounting: our stainless steel brackets are the ideal interface between the substructure and the handrail tube.
We offer this essential component in an enormous variety of designs. Manufactured from high-quality V2A or V4A stainless steel, you’ll find the technically perfect bracket for every structural challenge – whether it’s a steep staircase or a straight landing.
Our variants: threaded, articulated & welded
Not every handrail is the same. That is why we stock an extensive range of bracket designs that go far beyond the standard. Please note that these are the bracket fittings alone (without wall plates or pins). Choose exactly the version that suits your project:
-
Rigid brackets (for welding on both sides):
The minimalist solution for professionals. These brackets have no threads and are welded at both the bottom (to the spindle/post) and the top (to the handrail). -
Brackets with a hinge:
Ideal for staircases. The angle of the handrail can be continuously adjusted to the rise via the integrated hinge. -
Variants with 1x thread:
Usually fitted with an internal thread (e.g. M6/M8) on the underside, allowing the bracket to be easily screwed onto a suitable support pin. -
Special brackets with 2x threads:
For maximum flexibility during installation, we stock versions with dual threading (e.g. a combination of internal and external threads) to accommodate different connection types. -
Connection to the handrail:
Choose between a flat mounting (for square tubing/wood) or a curved mounting (for round tubing Ø 33.7 mm / 42.4 mm).
Frequently asked questions about our support bracket attachments
No. In this category, you will find only the bracket itself (the upper connecting piece). Wall plates, washers or support pins are not included. These individual parts are ideal if you wish to assemble your own brackets or retrofit existing systems.
Threaded brackets (1x or 2x thread)
are easy to install and can often be replaced or adjusted without a welding machine.
Weld-on
brackets,
on the other hand, offer the most stable and durable connection. As no screws are visible, they often look more minimalist and elegant (‘cast as a single piece’).
That depends on the mounting plate. Use brackets with a flat mounting surface for rectangular tubes or wooden handrails. For round stainless steel handrails, you’ll need brackets with a curved mounting surface that matches the tube diameter exactly (common sizes: 33.7 mm, 42.4 mm or 48.3 mm).