Ø 52 mm
// The tried-and-tested solution for glass balustrades, façades and glass walls.
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating, building standard grating
- Grating fixing
- Grating, grating for channels, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press-Podestroste mit Antrittskante
- Safety toe cap
- Door frames
- Boat jetty
- Custom-made grating
- SEPGRATE designer covers
- Pulverbeschichtung für Gitterroste
- GRP
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- Freitragende Schiebetore (Kragarm)
- Bodengeführte Schiebetore
- Torantriebe & Steuerung
- Zubehör Schiebetor
- Schlösser & Riegel
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New arrivals
Filter products
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
The versatile professional standard: Glass point holder Ø 52 mm (V2A / V4A)
When standard holders don’t fit, this is the one to use. Our Ø 52 mm glass point holder is the universal solution for metal construction. It bridges the gap between the delicate 40 mm holders and the heavy-duty 70 mm anchors.
Its strength lies in its enormous variety of connection options. This is one of the few holders on the market that is also available as standard for large tube diameters (48.3 mm). Thanks to its slightly larger plate diameter (52 mm), it also offers a generous contact surface and neatly covers glass drill holes of 22 mm.
One bracket for all pipes and walls
Configure the Ø 52 mm bracket exactly as your substructure requires. We supply three precise connection options:
The connection options
- Flat connection: The classic choice for concrete walls, masonry or square tubes.
- Ø 42.4 mm connection: A perfect fit for standard balustrade posts.
- 48.3 mm (1½ inch) connection: The professional size! Many standard brackets stop at 42 mm. This bracket fits perfectly onto the thicker 48.3 mm structural tubes, enabling particularly sturdy railings.
The materials
- V2A stainless steel (AISI 304): Our standard choice for long-lasting applications indoors and in normal outdoor environments.
- V4A stainless steel (AISI 316): The durable choice for coastal areas, swimming pools or areas with high levels of air pollution.
- Additional option: For specific design requirements, this bracket is also available in black (RAL 9005) on request.
Technical details for your planning
This holder is designed for flexibility. It securely accommodates a wide range of glass thicknesses:
- Clamping range: 6.00 mm to 21.52 mm (covers toughened glass and thicker laminated safety glass).
- Required glass drill hole: 22 mm.
👨🔧 Expert advice: Calculations for those with specific requirements
Many of our customers use the Ø 52 mm bracket for custom designs (e.g. with threaded rods for large wall clearances). Please note: Due to its more robust construction and thicker rubber inserts, the calculation for the stud length differs from that of the smaller 30/40 mm brackets.
For the Ø 52 mm bracket, you must use this formula to determine the minimum length of the threaded pin:
= minimum length of threaded pin
Whether for 42 mm or 48 mm tubes, in V2A or V4A: with Fenau’s Ø 52 mm glass point holder, you have the right standard holder for every structural requirement at your fingertips.