Post cap 10x10
// 10×10 post caps for sturdy fence posts and long-lasting weather protection
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
Wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- Letters
- Drive-in plugs
- Raw steel Klöpper discs
- Handrail brackets + accessories
- House numbers
- Balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- Pipe bends
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, adjustable in 4 directions
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Lifting gate fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for setting in concrete
- with an angled tab
- with a wall plate
- Fence posts
- Fence rails
- Decorative mouldings
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating – Building Standard grating
- Grating fixing
- Grating, channel grating, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press platform grates with a step edge
- Safety toe cap
- Door frames / Frames
- Boat jetty grating
- Made-to-measure grating
- SEPGRATE designer covers
- Powder coating for gratings
- GRP
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1,200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2,000 kg
- Full range
- All sizes fit 1 to 5
- Cast iron rollers for sliding gates
- Cantilever sliding gates
- Ground-mounted sliding gates
- Gate operators & control systems
- Sliding gate accessories
- Locks & Bolts
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New Products
Filter products
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Post caps 10x10 cm (100x100 mm) – Protection for sturdy posts
Why are caps particularly important for 10x10 cm posts?
Wooden posts measuring 10x10 cm (100x100 mm) are more solid than standard posts and often serve as load-bearing elements in a structure – for example, in entrance gates, corner posts of privacy fences or sturdy pergolas. Due to the larger cross-sectional area, the upper end grain here provides an even greater surface area for rain and snow to penetrate.
Without protection, water penetrates deeply, which can be disastrous for load-bearing posts. A precisely fitting 10x10 post cap does not seal this surface, but safely channels moisture away and, through rear ventilation, ensures that your post remains stable for decades.
Guide: Everything you need to know about 100x100 mm post caps
To help you make the right choice, we’ve answered the most frequently asked questions here.
➔ Will the cap fit my 10x10 square timber?
Please check the measurements: Standard ‘10x10’ square timber usually has actual dimensions of 100 x 100 mm. Our caps are precisely tailored to this and have internal dimensions of approx. 101 x 101 mm.
This minimal clearance of 1 mm is technically necessary. Wood expands when wet. If the cap were too tight, it would constrict the wood or cause cracks. This means it can be easily slipped on yet still sits securely.
➔ Which material do you recommend?
As 10x10 posts often feature prominently in the garden, appearance is crucial. We stock three high-quality options:
- V2A stainless steel (Premium): You can choose between a high-gloss polished or a matt finish . Stainless steel is completely rust-proof and looks very elegant and high-quality on thick posts.
- Anthracite RAL 7016 (Modern): Perfect for new builds. The powder-coated surface in dark grey complements modern windows, doors or double-bar fencing in the same shade perfectly.
- Galvanised steel (Robust): The classic choice for timber fences. Thanks to hot-dip galvanising, the cap is extremely durable and withstands all weather conditions. Ideal when functionality and value for money are the main priorities.
➔ Are there value packs available for 10x10 caps?
Yes. Although 10x10 posts are often used less frequently than the thinner variants, buying them as a set is worthwhile for larger projects (e.g. a complete paddock fence). We offer our 100x100 mm caps in sets of 10, which allow you to save significantly compared to buying them individually.
➔ How do I fit the cap securely?
Each cap has two fixing holes on the sides. Place the cap onto the post and secure it with two suitable screws (ideally sheet metal screws with a sealing washer or stainless steel screws). Avoid ‘simply’ gluing the cap in place with silicone – screwing it on is more durable and allows for vital air circulation beneath the cap.