Ø 50 mm
// More surface area, greater stability – glass point fixings for demanding projects.
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating, building standard grating
- Grating fixing
- Grating, grating for channels, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press-Podestroste mit Antrittskante
- Safety toe cap
- Door frames
- Boat jetty
- Custom-made grating
- SEPGRATE designer covers
- Pulverbeschichtung für Gitterroste
- GRP
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- Freitragende Schiebetore (Kragarm)
- Bodengeführte Schiebetore
- Torantriebe & Steuerung
- Zubehör Schiebetor
- Schlösser & Riegel
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New arrivals
Filter products
Available, : Lieferzeit 5-10 Werktage
Available, : 1-3 days
Available, : Lieferzeit 5-10 Werktage
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
The Certified Product: Glass point fixings, Ø 50 mm, with AbP No. 1 for balustrades and overhead applications
Safety is not an option; it is a requirement. Our Ø 50 mm glass point fix is therefore the best-selling product for construction projects with structural requirements. It combines unbeatable value for money with tested industrial quality.
This holder sets the standard for fall protection (railings) and demanding overhead glazing (canopies). Where smaller holders reach their limits, the 50 mm disc provides the necessary reserve capacity and contact area for heavy laminated safety glass (VSG).
🛡️ Your benefit: With a General Building Inspection Test Certificate (AbP)
With this product, you are legally on the safe side. The bracket has an AbP. For your project, this means:
- ✔ Immediate approval: The test certificate confirms the product’s suitability for use. You generally avoid the need for the expensive and time-consuming ‘case-by-case approval’ (ZiE) from the building authority.
- ✔ Certified safety: Tested for beam loads and overhead applications.
Flexibility: As a set or individually
As with our other models, the Ø 50 mm bracket is usually supplied as a complete set (including rubber pads and a standard threaded rod), so you can get started straight away.
But we know that professionals often have specific requirements. If you put the bracket together individually (e.g. using your own threaded rods for large wall clearances), the technical calculations will differ from those for the smaller 40 mm bracket.
⚠ Please note when customising: The 6 mm rule
As the Ø 50 mm bracket is more robustly constructed and features thicker seals, the offset dimension in the formula changes. To determine the correct threaded pin length, please ensure you use this formula:
= minimum threaded pin length
Important: Unlike the 40 mm holder (where the deduction is -3 mm), 6.0 mm must be deducted here! ‘B’ is the dimension of the base body as shown in the drawing. The 15 mm allowance ensures that the thread engages deeply enough in the lower part.
Put your trust in the market leader. With Fenau’s Ø 50 mm glass point holder with AbP, you can build safely, in accordance with standards and cost-effectively.