Adjustable glass holder
// Adjustable glass clamps for precise alignment of glass surfaces.
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- letters
- Drive-in plug
- Flat-rolled steel, unworked
- Handrail brackets + accessories
- House numbers
- balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- pipe bend
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, 4-way adjustable
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Up-and-over door fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for embedding in concrete
- with a hinged flap
- with a wall plate
- Fence posts
- fence posts
- Decorative strips
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating, building standard grating
- Grating fixing
- Grating, grating for channels, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press-Podestroste mit Antrittskante
- Safety toe cap
- Door frames
- Boat jetty
- Custom-made grating
- SEPGRATE designer covers
- Pulverbeschichtung für Gitterroste
- GRP
-
Marine | Boat accessories
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2000 kg
- Full range
- Fits all sizes 1 to 5
- Cast iron rollers for sliding gates
- Freitragende Schiebetore (Kragarm)
- Bodengeführte Schiebetore
- Torantriebe & Steuerung
- Zubehör Schiebetor
- Schlösser & Riegel
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New arrivals
Filter products
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : Lieferzeit 5-10 Werktage
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
The solution: Adjustable glass fixings with AbP – when the wall isn’t plumb
Every tradesperson is familiar with the problem: everything looks straight on the drawing, but the reality on site is quite different. Walls are uneven, drill holes aren’t 100 per cent accurate, or the substrate isn’t level. Standard holders reach their limits here.
Our solution is **“The Innovative”**: an adjustable glass point fix that has been specially developed to invisibly compensate for construction tolerances. It’s a lifesaver when you need to install glass quickly, tension-free and in accordance with standards.
🛡️ Flexibility with safety: Includes AbP
At Fenau, ‘adjustable’ does not mean less stable. On the contrary: this innovative range also comes with a General Building Inspection Test Certificate (AbP).
This means you are installing a building authority-approved solution for fall protection, which simplifies the approval process whilst offering maximum freedom during installation.
Innovation in detail: What makes this bracket so special
This bracket is more than just a piece of stainless steel. It is a well-designed tool for professionals. Here are the features that make your work easier:
-
🔄 360° adjustability & slotted hole:
The centrepiece is the integrated slotted hole in the body. You can rotate the bracket through 360 degrees and align it precisely. Is the drill hole in the wall slightly off-centre? No problem – simply readjust the bracket until the glass fits perfectly. -
📏 Adjustable wall clearance (36–45 mm):
Is the wall bulging or uneven? Using the threaded mechanism, you can continuously adjust the wall clearance between 36.00 mm and 45.00 mm . This allows you to compensate for differences in level without having to improvise with shims. -
🖐️ The ‘third hand’: installation aid with a rubber ring:
An ingenious detail for fitters: a special rubber ring on the bracket acts as a support. You can ‘rest’ the heavy glass pane there during installation before screwing it into place. This acts like a third hand and prevents the glass from breaking or getting scratched whilst being positioned.
Technical specifications for your planning
Despite the adjustment mechanism, this bracket covers an enormous range of applications:
- Clamping range: Flexible for glass thicknesses from 12.00 mm to 25.52 mm (ideal for thick laminated safety glass).
- Material: High-quality stainless steel (V2A / V4A) for a long-lasting finish.
- Applications: Railings, balustrades and any situation where the substrate is not perfectly level.
Save yourself the hassle and costly rework. With Fenau’s adjustable glass point holder (with AbP), you can elegantly compensate for tolerances and deliver a perfect result.