Post cap 9x9
// 9×9 post caps for durable fencing structures and neat finishes
Filter products
-
Pipe connector
- Ductile iron pipe fittings | T-pieces
- Ductile iron pipe fittings | Elbows
- Ductile iron pipe fittings | Cross pieces
- Ductile iron pipe connectors | Wall brackets / base plates
- Ductile iron pipe connectors | Handrails
- Ductile iron pipe coupler | Adjustable angle
- Ductile iron pipe couplings | Clamping rings / Flanges
- Ductile iron pipe couplings | Elbows
- Ductile iron pipe couplings | Extension pieces
- Ductile iron pipe couplings | Variable diameter
- Ductile iron pipe couplings | Accessories
-
Stainless steel components
- Plate holder
- Glass and panel holders
- Stainless steel glass holder
- Glass balustrades
- Glass point holder
-
Stainless steel balustrades
- Cover rosettes | Post covers
- Anchor plates
- Spacers
- Balustrade posts | Post fixings
- Handrail bracket
- Handrail supports
- Mounting plate
- Support pins for handrail brackets
- Carrying handle
- Cross-bar bracket
- Pipe plug
- Post caps
- Klöpper-formed stainless steel bottoms
- Ronden
-
Pipe bends
- 90-degree elbow (welded fittings, Type 3 DIN)
- 45-degree elbow (welded fittings, Type 3 DIN)
- 180-degree elbow (welded fittings, Type 3 DIN)
- 90-degree elbow (welded fittings, Type 2 DIN)
- 90-degree elbow (welded fittings, Type 5)
- Pipe bends, special-angle fittings, welded fittings
- 90-degree elbow welded fittings
- T-piece welded fittings
- Connector, welded fittings
- Cross-piece welded fittings
- Connectors
- Decorative fittings
- Wall anchors | Floor anchors
- Clamping profile
- Glass and door systems
- LED handrail
- Balls | Cones | Cubes
- Stainless steel tubes | Bar stock
- Grooved pipes
- Push-fit fittings / End caps for grooved pipes
- Home | Garden
- Door construction | Door locks | Door handles
- Stainless steel cables | Wire rope clamps | Accessories
- Marine | Boat supplies
- Accessories | Screws | Adhesives
- Black Lane – Powder-coated stainless steel parts
- Sliding glass door
- BRENK-fix® Base Holder
- RAIL FIX Installation Guide
-
Wrought iron
- Caps
- Anchor plates
- Weld-on strips
- Weld-on brackets
- Baroque programme
- Letters
- Drive-in plugs
- Raw steel Klöpper discs
- Handrail brackets + accessories
- House numbers
- Balls
- Plastic handrails
- Rings | Crosses
- Ronden
- Locks | Door handles | Other accessories
- Bar stock
- Pipe bends
-
Door hinges
- Gate hinge with welded sleeve
- Door hinge with slotted plate
- Door hinge with a long thread
- Door hinges, adjustable in 4 directions
- Self-closing gate hinges
- Threaded sleeves for gate hinges – spares & accessories
- with a weld-on plate
- Lifting gate fittings
- Adjustable wall plates for gate hinges
- Brass washers for hot-dip galvanised gate hinges
- Eye bolts, sold individually, for gate hinges
- for setting in concrete
- with an angled tab
- with a wall plate
- Fence posts
- Fence rails
- Decorative mouldings
- Enamel and paints
- Blacksmithing Basic Line
-
Grating steps
-
Grating
- Light well grating – Building Standard grating
- Grating fixing
- Grating, channel grating, suitable for vehicle traffic
- Industrial grating
- Press-welded grating
- Press platform grates with a step edge
- Safety toe cap
- Door frames / Frames
- Boat jetty grating
- Made-to-measure grating
- SEPGRATE designer covers
- Powder coating for gratings
- GRP
-
Sliding gate fittings
- Sliding gate fitting 0 | Gate weight per leaf up to 90 kg
- Sliding gate fitting 1 | Gate weight per leaf up to 200 kg
- Sliding gate fitting 2 | Gate weight per leaf up to 400 kg
- Sliding gate fitting 3 | Gate weight per leaf up to 600 kg
- Sliding gate fitting 4 | Gate weight per leaf up to 1,200 kg
- Sliding gate fitting 5 | Gate weight per leaf up to 2,000 kg
- Full range
- All sizes fit 1 to 5
- Cast iron rollers for sliding gates
- Cantilever sliding gates
- Ground-mounted sliding gates
- Gate operators & control systems
- Sliding gate accessories
- Locks & Bolts
-
Sealing plugs and protective caps
- Aluminium fences and aluminium gates
- New Products
Filter products
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Available, : 1-3 days
Post caps 9x9 cm (90x90 mm) – The standard for privacy fences
Why is protection so important for 9x9 cm posts?
9x9 cm (90x90 mm) posts often bear heavy loads, such as 180x180 cm privacy screens or pergola beams. If these load-bearing posts start to rot at the top of the end grain, the stability of the entire fence is compromised.
Our 9x9 post cap does not seal this critical area, but covers it like an umbrella. Water runs off, air gets in – the post stays dry and stable. A small investment that prevents the costly replacement of rotten posts.
Buying guide: Everything you need to know about 90x90 mm post caps
Here you’ll find answers to our customers’ most frequently asked questions.
➔ Which posts are these caps suitable for?
This category includes caps for posts with a nominal dimension of 9 x 9 cm. In practice, these posts are usually planed and measure exactly 90 x 90 mm. Our caps have an internal dimension of approx. 91 x 91 mm.
Why the 1 mm clearance? Wood is a natural material. It expands when damp and contracts when dry. This slight oversize ensures that the cap will still fit in the autumn without becoming too tight or causing the wood to split.
➔ Which material suits my privacy fence?
We stock only durable metal options to suit your garden style:
- Anthracite (RAL 7016): The current trend. Many modern privacy fences or WPC fences feature anthracite-coloured elements. Our powder-coated caps in RAL 7016 ensure a uniform, modern look.
- V2A stainless steel (brushed or polished): Timeless and elegant. Stainless steel has a very high-quality appearance and creates a great contrast to warm wood. It is also completely rust-free and maintenance-free.
- Galvanised steel: The practical, professional solution. Hot-dip galvanised steel is extremely robust and offers the classic ‘metal look’. Ideal for functional fences or when you’re on a tight budget.
➔ Should I buy sets?
Yes, it’s almost always worth it. A standard privacy fence requires a post every 1.80 metres. With our sets of 10 for 90x90 mm posts, you can cover approx. 18 metres of fencing and benefit from a lower unit price compared to buying individual posts.
➔ Installation tip for 9x9 posts
Privacy fences in particular often have tall posts (1.80 m or more). Ensure the cap is securely fastened in the event of a storm. Use the two side drill holes and screw the cap firmly in place. Avoid using silicone – the wood must be able to breathe beneath the cap to prevent mould from forming.